In order to prevent an electric
shock, be sure to turn power off before performing work and touching
interior parts of the machine.
Do not expose the game board
without good reason. In this product, setting changes are made
during the test mode. The game board need not be operated. Use
the game board as is, with the settings made at the time of shipment.TAKING OUT THE IC BOARD
When replacing the IC board (Game board) take out the IC board
by using the following procedure.
Turn the main switch off.
The shield case is inside the side door on the right side of the
cabinet. Unlocking the door can cause the side door to open due
to its weight. To avoid injury and to prevent damaging the door,
etc., be sure to hold the door while unlocking. Carefully open
the door. The door has a stopper to prevent it from opening in
excess of 90 degrees.
Take off the 3 screws to remove the case lid. The game board is
contained in the shield case.
Take off the 3 screws to remove Case Lid. The Game Board is contained
in the Shield Case.
COMPOSITION OF GAME BOARD
Game Board Gun Blade NY (833-12562)
| No. | PART No. | DESCRIPTION |
| (1) | 837-10854-02-91 | M0DEL2 B- CRX MAIN BD COM |
| 837-12312-91 | B-CRX MAIN BD COM REV 1.1 | |
| (2) | 834-12563 | ROM BD GUNBLADE NY |