STATIC CONVERGENCE ADJUSTMENT
For the purpose
of static prevention, special coating is applied to the CRT face
of this product. To protect the coating, pay attention to the
following points. Damaging the coating fllm can cause electric
shock to the customers. For the caution to be heeded when cleaning,
refer to the corresponding section of Periodic Inspection Table.
Do not apply or rub with a hard item (a rod with pointed edge,
pen, etc.) to or on the CRT surfaces.
Avoid applying stickers, seals, etc. on the CRT face.
Do not remove aluminum foils from the CRT corners. Removing the
aluminum foils can cause static prevention effects to be lowered.